Xytronic LF-8800 100w Soldering And Dedesoldering Soldering Iron Station

  Xytronic LF-8800 100w Soldering and Dedesoldering Soldering Iron Station   Key  Features:    The LF-8800 operates with a high       power 32V/100W output designed for lead-free soldering removal jobs to meet the specific RoHS requirement. This unit has a built-in self-contained, oil-free, electronic vacuum pump that will not be excessive in continuous use, eliminating the need for additional workshop      air controlled and maintenance-free and quietly operated.  The vacuum pump provides suction power up to 50cm/Hg (20in/Hg), activated by a push-button switching circuit located on the removal wand  . The inner solder collector is removed for quick and easy cleaning. The inner mesh aluminum cooling strip has good solder chipadherence. It also makes a cooler handle, improving operator comfort with the vents.   The LF-8800 includes electronic circuits that allow the user to adjust the soldering tip temperature from 150 °C to 480 ° C (302 ° F) to 300 ° C (896 ° F) and the remover tip temperature from 450°C (572°F) to 450 °    C (842 ° F) without changing the tips or heating elements . Also, with the digital display reading and pressing keys on the front panel , you get a clear vision and a comfortable environment.  The temperature is maintained 3 ± to ensure maximum temperature   as close  to the working surface of the tip as possible at °C (±  6°F) to the operating temperature with a thermocouple . Rapid heating with minimal overshoot , rapid recovery , and meticulous temperature control results in both these results. Heater/Sensor Detection Failed: If the sensor circuit fails, the heater power is turned off. Temperature "Lock-Out" Feature: The temperature can be locked with a cipher code. ESD Safe and Spike Free Circuit: "Zero Voltage" electronic switching design frequently protects voltage and current sensitive components (CMOS devices, etc.) against sudden damage to current and transient voltage generated by less efficient, mechanical switching stations. Suction Delayed: A delayed toggle feature is included for the unit that allows the pump to continue suction for 1.5 seconds, to eliminate the problem of clogging soldering up to the tip after the actuator switch is released Energy Saving Mode: If the station is idle for 20 minutes, the energy saving feature will be busy, automatically resetting the temperature to 150°C from the previous setting. Iron Operation Option: Both soldering, dismounting irons can be used at the same time.       Products that do not come out of it; Optional: SMD Tweezers: Designed for overhauling of special SMD chips, SOT, Disassembled IC etc. Optional: Hot Air Pen (HAP 80): Lifts up 25mm SMD chips and flat packs. Optional: Fume Extractor 426 DLX Input 220 to 240V AC, 50Hz Soldering output 100W Desoldering output 100W Temperature range soldering 150°C (302°F) to 480°C (896°F) Temperature range desoldering 300°C (572°F) to 450°C (842°F) Dimensions 105 x 90 x 126mm W x H x D Weight 6.5kg